Home / Products / Flood Light Poles
Double Tier High Mast Light with 16 Floodlights
Double Tier high mast light carrying 16 floodlights, on a hot-dip galvanised steel pole supplied with the base plate, the anchor bolts and the foundation drawing.
- Section: Round conical (tapered round) steel pole
- Crown type: Fixed crown
- Crown frame: Double Tier frame carrying 16 floodlights
- Standard heights: 15 m to 30 m; other heights produced to the project drawing
- Material: Steel Q235 or Q355
- Finish: Hot-dip galvanised as standard
- Supplied with: Base plate, anchor bolts, earthing terminal and foundation drawing
- Mounting: Crown frame welded to the pole top and drilled ready for the floodlights
Double Tier high mast lights are specified where a large area has to be lit from a single point — stadiums, ports, freight yards, highways and industrial sites. This pole carries a Double Tier crown frame with 16 floodlights, so the whole area is covered from one foundation.
The pole is delivered hot-dip galvanised with the base plate welded on, the anchor bolts and the foundation drawing. The crown frame is drilled to match the floodlight brackets, and the pole door gives access to the wiring and the earth terminal.
At a glance
| Section | Round conical (tapered round) steel pole |
| Crown type | Fixed crown |
| Crown frame | Double Tier frame carrying 16 floodlights |
| Standard heights | 15 m to 30 m; other heights produced to the project drawing |
| Material | Steel Q235 or Q355 |
| Finish | Hot-dip galvanised as standard |
| Supplied with | Base plate, anchor bolts, earthing terminal and foundation drawing |
| Mounting | Crown frame welded to the pole top and drilled ready for the floodlights |
Double Tier High Mast Light with 16 Floodlights — technical parameters
| Section | Round conical (tapered round) steel pole |
| Crown type | Fixed crown |
| Crown frame | Double Tier frame carrying 16 floodlights |
| Standard heights | 15 m to 30 m; other heights produced to the project drawing |
| Material | Steel Q235 or Q355 |
| Finish | Hot-dip galvanised as standard |
| Supplied with | Base plate, anchor bolts, earthing terminal and foundation drawing |
| Mounting | Crown frame welded to the pole top and drilled ready for the floodlights |
| Crown options | Fixed, ladder-access or internally lifting crown; RAL powder coating on request |
| Pole section | Diameter, wall thickness and base plate confirmed to the wind zone at your site |
Tell us the pole height, the number of floodlights, the mounting height and the wind zone and we will confirm the section, the wall thickness, the base plate and the anchor bolts for your project.