High Mast Pole
High mast lights from 15 m to 30 m with a fixed, ladder-access or internally lifting crown carrying three to eighteen floodlights, on a single-piece hot-dip galvanised mast for stadiums, ports, freight yards and highways.
30 products
High Mast Poles
High mast poles from 15 m to 30 m in Q235 or Q355 steel, hot-dip galvanised and supplied with the base plate, the anchor bolts and the foundation drawing.
A Mast Built Around the Crown
Specifications
High Mast and Floodlight Pole Range
Range: 15 m to 30 m carrying three to eighteen floodlights on a ring, cross, triangular or platform crown frame.
Crown: fixed, ladder-access or internally lifting crown with a winch and a cable guide.
Material: Steel Q235 or Q355, hot-dip galvanised as standard, or galvanised and powder coated to a RAL colour.
Supplied with: Base plate, anchor bolts, earthing terminal, pole door and foundation drawing. Diameter, wall thickness and base plate are confirmed for the wind load and the floodlight load at your site.
Material: Steel Q235, Q235B or Q345, hot-dip galvanised as standard, or galvanised and powder coated to a RAL colour.
Supplied with: Base plate, anchor bolts, earthing terminal, pole door and foundation drawing. Pole diameter, wall thickness and base plate are confirmed for the wind load and the floodlight load at your site.
Material and Tolerances
Material: Steel Q235, Q235B, Q345
| Property | Tolerance |
|---|---|
| External diameter | ±1% |
| Shape | ±3% of the diameter |
| Thickness | ±10% |
| Straightening | ±0.3% of total length |
| Length | ±0.5% |
Where High Mast Lights Are Used
Stadiums and Sports Grounds
A single 20 m to 30 m mast with a ring crown lights the whole pitch or track from one foundation, with no pole inside the playing area.
Ports and Freight Yards
Lifting and ladder-access crowns carry up to eighteen floodlights over container yards, with the winch or the access door kept at working height.
Construction Details
Base Plate & Flange
A square base plate is welded to the pole root and drilled for the anchor bolts, with the weld dressed and the whole assembly galvanised.
Finish & Galvanising
Hot-dip galvanised as standard, or galvanised and powder coated to a RAL colour when the specification calls for it.
