Home / Products / Street Light Pole
Crown Blade Single-Arm Street Light Pole
Single arm with a decorative blade finial at the pole top
- Section: Round conical (tapered round)
- Arm configuration: 1 arm; curved arm with decorative blade finial ≈1.4 m reach
- Material: Steel Q235, Q235B or Q345
- Finish: Hot-dip galvanised as standard; galvanised + powder coating to a RAL colour on request
- Standard heights: 6 m to 12 m; other heights from 3 m upwards produced to the project drawing
- Supplied with: Base plate, door, cable entry, lamp arm, anchor bolts and foundation drawing
Request a quotation for Crown Blade Single-Arm Street Light Pole
Quantity, destination port and your contact details are enough for us to price it. Tell us the pole height or road class if you have them.
A single curved arm carries the luminaire with a reach of about 1.4 m and ends in a decorative blade finial. Tell us whether the blade should sit above or below the fixing.
At a glance
| Section | Round conical (tapered round) |
| Arm configuration | 1 arm; curved arm with decorative blade finial ≈1.4 m reach |
| Material | Steel Q235, Q235B or Q345 |
| Finish | Hot-dip galvanised as standard; galvanised + powder coating to a RAL colour on request |
| Standard heights | 6 m to 12 m; other heights from 3 m upwards produced to the project drawing |
| Supplied with | Base plate, door, cable entry, lamp arm, anchor bolts and foundation drawing |
| Mounting | One arm, welded at the required height and drilled ready for the luminaire |
Where the Crown Blade single-arm fits
A blade-shaped arm that widens from the shaft and narrows toward the luminaire — a flat plate rather than a tube, which is why it reads as a single clean line from below. One arm on a round conical shaft, 6–12 m.
Blade arms are usually specified when the pole is seen against the sky, because a tube reads as a thin line while a blade reads as a shape. That makes it a boulevard and plaza specification rather than a highway one. Where two sides must be lit, pair it with the Lotus Petal double-arm.
- Single blade arm; round conical pole.
- Flat plate section — check the wind area against the local code.
- Hot-dip galvanised; RAL colour optional.
Crown Blade Single-Arm Street Light Pole — technical parameters
| Height H | Wall thickness S (mm) | Top Ø D1 (mm) | Bottom Ø D2 (mm) | Base plate F1 (mm) | Weight F2 (kg) |
|---|---|---|---|---|---|
| 6 m | 2.5 / 3 | 60–76 | 135 / 140 | 280×280×12 | 55 |
| 7 m | 2.75 / 3 | 60–76 | 150 | 280×280×12 | 81 |
| 8 m | 3 | 60–76 | 150 / 160 | 280×280×12 | 100 |
| 9 m | 3.25 / 3.50 | 60–76 | 175 / 180 | 300×300×12 · 340×340×14 | 118 |
| 10 m | 3.5 / 3.75 | 60–75 | 180 / 190 | 350×350×12 · 360×360×14/16 | 146 |
| 11 m | 3.5 / 3.75 / 4 | 60–70 / 80 | 180 / 200 / 210 | 350×350×16 · 360×360×16/18 | 165 |
| 12 m | 3.75 / 4 | 60–70 / 80 | 200 / 210 | 350×350×16 · 380×380×16/18/20 | 190 |
Send the road width, the pole height, the luminaire you plan to fit and any streetscape pattern to match and we will confirm the section, the bracket form and the base plate.