Solar Street Lights
Split and all-in-two solar street lighting for roads, residential communities, industrial parks and off-grid sites. Send us the road width, mounting height and lighting hours — we confirm the configuration and quote.
9 products
Product models
Matching the series to the mounting height
The four split series below share the same build — separate panel, LiFePO4 battery, IP65 lamp head — and differ in power band and the mounting height they are designed for. All four are IP65. Pick the height first, then the power that reaches the required lux on the road.
| Series | Rated power | Efficacy | Mounting height |
|---|---|---|---|
| HC-DT-1 | 30 W – 150 W | 120 LM/W | 5–15 m |
| HC-DT-2 | 30 W – 120 W | 120–130 LM/W | 5–12 m |
| HC-DT-3T | 20 W – 150 W | 140 LM/W | 6–15 m |
| HC-DT-4 | 100 W – 200 W | 120 LM/W | 8–20 m |
Pages without a model code are configured to the project: arm arrangement, panel wattage and battery capacity follow the site, not a fixed catalogue number.
- 30 – 200 WPower range
- IP65Waterproof grade
- 5 – 20 mMounting height
- 3 YearsQuality warranty
Split Solar Street Lights
Panel, battery box and lamp head are separate units, so panel area, battery capacity and light output can each be sized for the road. Suits wide carriageways, mounting heights above 10 m and projects that must meet a specified lighting class.
HC-DT-1
- Lamp head 30 / 50 / 60 / 80 / 100 / 150 W
- Efficacy 120 LM/W
- Colour temp. 3000 / 4000 / 5700 K
- Mounting height 5 – 15 m
- Input AC mains or DC solar
HC-DT-2
- Lamp head 30 / 50 / 60 / 80 / 100 / 120 W
- Efficacy 120 – 130 LM/W
- Colour temp. 6000 K
- Mounting height 5 – 12 m
- Lamp size 408 × 230 to 600 × 257 mm
HC-DT-4
- Lamp head 100 / 150 / 180 / 200 W
- Efficacy 120 LM/W
- Colour temp. 3000 / 4000 / 5700 K
- Mounting height 8 – 20 m
- Lamp size 572 × 328 to 671 × 328 mm
AC and DC are not interchangeable. Input voltage, frequency and the controller arrangement differ between models and series. Tell us the model and we send its input voltage, current and controller layout from the model sheet — we do not publish a generic voltage, because one does not exist across the range.
All-in-Two and Waterproof Split
Two ways to keep the pole free of a separate battery box. In the all-in-two the battery sits inside the lamp body, so only the panel is separate and it can still be aimed for the best solar exposure — suits community roads, residential streets and mounting heights up to about 10 m. In the waterproof split the panel, the lamp head and the battery box are three separate items, the box is reached from the ground, and each part is replaced on its own.
All-in-Two Solar Street Lamp
- Rated power 60 / 80 W
- Battery inside the lamp body
- Efficacy 120 LM/W
- Mounting height 6 – 8 m
- Rating IP65
Waterproof Split Solar Street Light
- Rated power 30 – 120 W
- Battery in a separate box on the pole
- Mounting height 6 – 10 m
- Pole hot-dip galvanised, single or double arm
- Colour temp. 3000 / 4000 / 5700 K
Built From Components You Can Replace
Nothing here is a sealed black box. The battery, the panel and the lamp head are separate items, and the photographs below are the two versions as they leave the workshop.
Key Features
- Split architecture
Panel, battery box and lamp head are separate units, so each can be sized for the road and the site.
- 30 – 200 W, 120 – 130 LM/W
Three lamp-head series in 3000 K, 4000 K and 5700 K, from residential roads to highways.
- LiFePO4 battery
Longer cycle life, lower weight and better performance at high ambient temperature than lead-acid.
- IP65 housing
Waterproof housing rated IP65, for coastal and high-humidity sites.
- Ground-level battery service
The battery box sits on the pole or at its base, so it can be serviced without a platform.
- AC or DC input
The HC-DT range is available as a mains AC lamp head or as a DC solar system.
Split or All-in-Two?
| Split | All-in-Two | |
|---|---|---|
| Best for | Wide carriageways, highways, mounting heights above 10 m | Community roads, residential streets, rural lanes |
| On the pole | External battery box | No external box |
| Panel | Sized freely for the road and the site irradiance | One module per unit |
| Battery service | Accessible at ground level | Inside the lamp body |
| Mounting height | 5 – 20 m | 4 – 12 m |
Where These Lights Are Used
Road width, mounting height and the number of lighting hours per night decide the configuration — not the product name. These are the four cases we are asked for most often.
Selection Guide
| System | Lamp head power | Mounting height | Typical use |
|---|---|---|---|
| HC-DT split | 30 – 200 W | 5 – 20 m | Highways, wide carriageways, industrial estates |
| HC-ETH-2 all-in-two | 18 – 60 W | 4 – 12 m | Community roads, rural lanes, parks |
| All-in-Two 60 / 80 W | 60 / 80 W | 6 – 8 m | Residential streets |
| Waterproof Split | 30 – 120 W | 6 – 10 m | Coastal and high-humidity sites |
Solar panel, battery voltage, capacity and autonomy are sized per project from your nightly energy demand and required cloudy-day backup — not read off a fixed kit. Send the lighting hours, dimming schedule and rainy-day requirement with your BOQ and we confirm the configuration in the quotation.
Full model reference — split and all-in-two
HC-DT split series
| Series | Model | Wattage | Mounting height |
|---|---|---|---|
| HC-DT-1 | HC-DT-1-30W | 30 W | 5 – 7 m |
| HC-DT-1 | HC-DT-1-50W | 50 W | 7 – 9 m |
| HC-DT-1 | HC-DT-1-60W | 60 W | 7 – 9 m |
| HC-DT-1 | HC-DT-1-80W | 80 W | 8 – 10 m |
| HC-DT-1 | HC-DT-1-100W | 100 W | 8 – 10 m |
| HC-DT-1 | HC-DT-1-150W | 150 W | 12 – 15 m |
| HC-DT-2 | HC-DT-2-30W | 30 W | 5 – 7 m |
| HC-DT-2 | HC-DT-2-50W | 50 W | 7 – 9 m |
| HC-DT-2 | HC-DT-2-60W | 60 W | 7 – 9 m |
| HC-DT-2 | HC-DT-2-80W | 80 W | 8 – 10 m |
| HC-DT-2 | HC-DT-2-100W | 100 W | 8 – 10 m |
| HC-DT-2 | HC-DT-2-120W | 120 W | 10 – 12 m |
| HC-DT-4 | HC-DT-4-100W | 100 W | 8 – 10 m |
| HC-DT-4 | HC-DT-4-150W | 150 W | 10 – 12 m |
| HC-DT-4 | HC-DT-4-180W | 180 W | 12 – 15 m |
| HC-DT-4 | HC-DT-4-200W | 200 W | 15 – 20 m |
HC-ETH-2 all-in-two series
| Model | Wattage | Solar panel | Battery | Flux | Mounting height |
|---|---|---|---|---|---|
| HC-ETH-2-18W | 18 W | 50 W | 11.1 V 24 Ah | 3000 lm | 4 – 6 m |
| HC-ETH-2-30W | 30 W | 65 W | 11.1 V 28 Ah | 4000 lm | 5 – 7 m |
| HC-ETH-2-35W | 35 W | 80 W | 11.1 V 30 Ah | 5000 lm | 6 – 8 m |
| HC-ETH-2-40W | 40 W | 100 W | 11.1 V 42 Ah | 6000 lm | 7 – 9 m |
| HC-ETH-2-50W | 50 W | 130 W | 11.1 V 50 Ah | 8000 lm | 8 – 10 m |
| HC-ETH-2-60W | 60 W | 170 W | 11.1 V 63 Ah | 10000 lm | 9 – 12 m |
Panel figures are rated power at STC. Mounting heights are the manufacturer's recommendation and not a lighting design. The configuration for your order is confirmed in the quotation.
How We Support Your Project
- Project-based sourcingSupplier matched against your BOQ, drawings or tender specification — not a fixed kit list.
- Technical matchingSpecification, quantity, configuration and site conditions confirmed before quoting.
- Factory coordinationProduction, packing and delivery schedule coordinated with the selected factory.
- Pre-shipment inspectionInspection arranged to the agreed scope before the goods leave China.
- Export documentationCommercial and shipping documents prepared for your destination port.
- Multi-product supplyLuminaires, poles and matching components coordinated as one shipment.
BOQ, specification, drawings or a written project brief.
We confirm specification, quantity and site conditions.
Quotation, production coordination, agreed inspection and shipment arrangement.
Other Ranges
Send Us Your Project Requirements
Destination country and port, product type, quantity, mounting height and your BOQ — send what you have and we will ask for the rest. Reply with a suitable configuration and quotation.
Technical guides
Read before you specify
Practical notes on the decisions that decide whether a solar street lights package works on site, written for the people who sign the BOQ.