All-in-One Solar Lights

Built-in solar panel, LiFePO4 battery, LED light source and intelligent controller in one integrated unit. No wiring and no electricity bill.

29 products

Product models

Every all-in-one model in this range is compared on one page: 25 body styles with model codes and finishes.

All-in-One Solar Light

Built-in solar panel, LiFePO4 battery, LED light source and intelligent controller in one integrated unit. No wiring and no electricity bill — engineered for roads, residential communities and off-grid areas.

All-in-one solar light mounted on a pole
20W – 150W
Power range
IP65
Waterproof grade
5 Years
Quality warranty
0 Fee
No electricity cost
All-in-one integrated solar light unit with built-in battery

One Unit. Everything Integrated.

The HC series integrates the solar panel, lithium battery, LED light source and controller into one compact aluminium body. Because every unit is pre-assembled and factory tested before shipment, on-site work is limited to mounting the unit on the pole — no trenching, no cable runs and no connection to the grid.

This makes it the most cost-effective option for projects where installing power cables is difficult, slow or expensive.

Key Features

Integrated Design

Solar panel, LiFePO4 battery, controller and LED in a single die-cast aluminium body.

IP65 Waterproof

Full aluminium alloy structure with an IP65-rated enclosure, built for coastal and rainy regions.

LiFePO4 Battery

Long-cycle lithium battery, stable at high ambient temperature.

Intelligent Dimming

Dusk-to-dawn operation with motion-activated dimming and timer modes.

Tool-Free Installation

Pre-assembled and factory tested. Mount on the pole, tighten the bracket, done.

Remote Control Option

Lighting modes and dimming profiles set at the factory or adjusted by remote control.

LED Face & Solar Panel Face

The LED array and the monocrystalline solar panel sit on opposite faces of the same body, so the LED is protected from above while the panel stays clear of shadow. The mounting bracket clamps directly onto the pole — no separate bracket assembly required.

LED face and solar panel face of an integrated solar street light

From 20W to 150W — One Body Family

Choose the wattage by road width, pole height and required illumination level. The table below is a quick selection guide — our engineers will confirm the exact configuration for your project.

Five power sizes of the integrated solar street light range
PowerSolar PanelBatteryMounting HeightTypical Use
20W / 30W45W3.2V 60Ah4–6 mFootpaths, gardens, small lanes
30W / 40W50W3.2V 75Ah5–8 mResidential roads
40W70W3.2V 105Ah6–8 mCommunity roads
50W80W3.2V 120Ah7–9 mMain roads
60W90W3.2V 150Ah7–10 mMain roads, industrial parks
80W / 100W115W12.8V 60Ah8–11 mHighways, arterial roads
120W / 150W200W25.6V 60Ah12–16 mExpressways, large interchanges
Three model sizes of all-in-one solar lights

Full Specifications

The HC range is available from 20W to 150W. All models share the same integrated architecture and IP65 aluminium body. LED chip options 3030 / 5050 / 7070 are available — the luminous flux column lists the output for each, in that order.

Table 1 – 20W to 60W (3.2V battery)

ModelHC-20W/30WHC-30W/40WHC-40WHC-50WHC-60W
Power20W / 30W30W / 40W40W50W60W
Solar Panel45W50W70W80W90W
Battery3.2V 60Ah3.2V 75Ah3.2V 105Ah3.2V 120Ah3.2V 150Ah
Luminous Flux
3030 / 5050 / 7070
2800–4200 / 3400–5100 / 3800–5700 lm4200–5600 / 5100–6800 / 5700–7600 lm5600 / 6800 / 7600 lm7000 / 8500 / 9500 lm8400 / 10200 / 11400 lm
PV Panel Size820×272 mm1070×272 mm1070×340 mm1070×398 mm1170×398 mm
Light Size900×300 mm1130×300 mm1130×370 mm1130×425 mm1230×425 mm
MountingTripod + support bar
Mounting Height4–6 m5–8 m6–8 m7–9 m7–10 m

Table 2 – 30W to 80W (12.8V battery)

ModelHC-30W/40W-LHC-40W/50WHC-50W/60WHC-60WHC-70W/80W
Power30W / 40W40W / 50W50W / 60W60W70W / 80W
Solar Panel50W70W80W90W100W
Battery12.8V 24Ah12.8V 30Ah12.8V 36Ah12.8V 45Ah12.8V 45Ah
Luminous Flux
3030 / 5050 / 7070
4200–5600 / 5100–6800 / 5700–7600 lm5600–7000 / 6800–8500 / 7600–9500 lm7000–8400 / 8500–10200 / 9500–11400 lm8400 / 10200 / 11400 lm9800–11200 / 11900–13600 / 13300–15200 lm
PV Panel Size1070×272 mm1070×340 mm1070×398 mm1070×398 mm1298×398 mm
Light Size1130×300 mm1130×370 mm1130×425 mm1130×425 mm1350×425 mm
MountingTripod + support bar
Mounting Height5–8 m6–8 m7–9 m7–10 m7–10 m

Table 3 – 80W to 150W (12.8V / 25.6V battery · vertical sleeve mounting)

ModelHC-80W/100WHC-90W/100WHC-100W/120WHC-120W/150W
Power80W / 100W90W / 100W100W / 120W120W / 150W
Solar Panel115W135W165W200W
Battery12.8V 60Ah25.6V 36Ah25.6V 45Ah25.6V 60Ah
Luminous Flux
3030 / 5050 / 7070
11200–14000 / 13600–17000 / 15200–19000 lm12600–14000 / 15300–17000 / 17100–19000 lm14000–16800 / 17000–20400 / 19000–22800 lm16800–21000 / 20400–25500 / 22800–28500 lm
PV Panel Size1460×398 mm1330×500 mm1420×580 mm1480×666 mm
Light Size1530×425 mm1360×530 mm1450×610 mm1520×700 mm
MountingTripod + support barVertical sleeveVertical sleeveVertical sleeve
Mounting Height8–11 m9–12 m10–14 m12–16 m
Common specification – all models
Colour Temperature: 4000K / 5000K / 6000K  ·  Control Mode: light control, time control, motion sensor  ·  Waterproof Grade: IP65  ·  Warranty: 5 years
Specifications are subject to change without notice. Custom wattage, colour temperature, pole height and battery capacity are available on request.

Where It Works Best

Solar street light among palm trees at dusk
Residential and resort roads
Solar street light over a residential pathway at dusk
Community pathways at dusk
Solar street lights along a walkway
Parks and walkways

Compact all-in-one units suit projects where cable trenching is costly or impossible — rural roads, residential communities, parks, car parks, industrial estates and off-grid areas. For wide roads and mounting heights above 9 m, our split solar street light range is usually the better fit.

How to Choose the Right Model

  • ✓Match wattage to road width and required lux level
  • ✓Size the battery for the required backup days during cloudy or rainy periods
  • ✓Choose pole height according to installation spacing and lighting uniformity
  • ✓Confirm the mounting method and whether a pole needs to be supplied

Delivered on Real Projects

All-in-one solar lights supplied and installed on road, community and rural lighting projects in the Philippines and other Southeast Asian markets.

Road lit by all-in-one solar lights at night
Road lighting at night
Installed all-in-one solar light in a Philippines project
Installed All-in-one solar light
Installation of solar street lights with a crane truck
Installation with crane truck

Sourced, Inspected, Delivered

We work directly with qualified solar lighting factories and carry out independent inspection before shipment — LED module function test, battery capacity check, waterproofing check and packing verification. You receive a photo pack of the actual goods before they leave China.

Solar panels staged in the workshop before assembly
Solar panels staged before assembly
Wiring and connection check on solar panels before assembly
Wiring and connection check
All-in-one solar light housing on the assembly bench
LED module assembly

Get a Quotation for Your Project

Tell us your pole height, road width and required lighting hours. We will recommend the right wattage and send a quotation within one working day.

Email: [email protected]  ·  Phone / WhatsApp: +86 134 0555 2599
No. 2 Zhuxi Road, Hanjiang District, Yangzhou, Jiangsu, China

Technical guides

Read before you specify

Practical notes on the decisions that decide whether a all-in-one solar lights package works on site, written for the people who sign the BOQ.