Home / Products / Solar Garden Light
Solar Garden Light – Ribbed Round – HC-GGD001
5V/20 W solar panel · 3.2V/20000 mAh · 80 LED chips · Ø480 × H440 mm · 3000–6500 K · IP65
- Model: HC-GGD001
- Product type: Post-top solar garden light
- Material: Die-cast aluminium + PC
- Solar panel: 5V/20 W
- Battery: 3.2V/20000 mAh
- LED chips: 80 PCS
- Colour temperature: 3000–6500 K
- Luminaire size: Ø480 × H440 mm
Request a quotation for Solar Garden Light – Ribbed Round – HC-GGD001
Quantity, destination port and your contact details are enough for us to price it. Tell us the pole height or road class if you have them.
The HC-GGD001 is a round post-top solar garden light with a ribbed, flared diffuser. The solar panel is built into the crown and the battery and controller sit inside the die-cast aluminium body, so once the head is on its post the fitting is complete — nothing else has to be mounted, wired or trenched.
The ring of ribs around the diffuser spreads the output of the 80 LED chips over a wide circle instead of concentrating it. Combined with a 5V/20 W panel and a 3.2V/20000 mAh battery, that makes the fitting well suited to lighting a garden path, a courtyard perimeter or the planting around a residential block where even, low-glare light matters more than a single bright pool. Charging takes three to five hours in good sun, the built-in optical sensor switches the luminaire on at dusk, and the colour temperature is selectable between 3000 K warm white and 6500 K daylight.
The head takes a standard Ø76 mm post, normally set 2600 mm to 4000 mm above ground. Send us the site layout and we will confirm how many units you need and at what spacing.
At a glance
| Model | HC-GGD001 |
| Product type | Post-top solar garden light |
| Material | Die-cast aluminium + PC |
| Solar panel | 5V/20 W |
| Battery | 3.2V/20000 mAh |
| LED chips | 80 PCS |
| Charge time | 3–5 H |
| Colour temperature | 3000–6500 K |
| Luminaire size | Ø480 × H440 mm |
| Recommended post | Ø76 mm, 2600–4000 mm |
| Ingress protection | IP65 |
| Typical application | Garden path, courtyard perimeter, planting beds |
Solar Garden Light – Ribbed Round – HC-GGD001 — technical parameters
| Item | HC-GGD001 |
|---|---|
| Model | HC-GGD001 |
| Product type | Post-top solar garden light |
| Material | Die-cast aluminium + PC |
| Solar panel | 5V/20 W |
| Battery | 3.2V/20000 mAh |
| Quantity of LED chips | 80 PCS |
| Charge time | 3–5 H |
| Colour temperature | 3000–6500 K |
| Size | Ø480 × H440 mm |
| Recommended post | Ø76 mm, 2600–4000 mm |
| Ingress protection | IP65 |
Parameters are the supplier's published figures for the models listed. Tell us the area to be lit, the pole height and the lighting hours you require and we will confirm the exact configuration for your project.
Where the HC-GGD001 fits
The smallest round body in the range: Ø480 × H440 mm with 80 chips on a 5V/20 W panel and 20,000 mAh. The ribbed round profile is the plainest of the round fittings, with no flare and no tilt, so it disappears into a row of posts instead of drawing attention.
It is the low-cost round option for perimeter lighting and planting beds, and the natural step down from the HC-TYD2705 disc, which adds 100 mm of height for the same electronics. Step up to the HC-TYD1104 for more chips and a larger panel.
- Ø480 × H440 mm; die-cast aluminium + PC.
- Post D76 mm, 2,600–4,000 mm.
- IP65, 3000–6500 K; garden path, courtyard perimeter, planting beds.