Home / Products / Street Light Pole
Lattice-Brace Single-Arm Street Light Pole
Single arm over a diamond lattice brace
- Section: Steel pole section as drawn — round tapered, octagonal or square tube
- Arm configuration: 1 arm; lattice (diamond) brace under the arm
- Material: Steel Q235, Q235B or Q345
- Finish: Hot-dip galvanised as standard; galvanised + powder coating to a RAL colour on request
- Standard heights: 6 m to 12 m; other heights from 3 m upwards produced to the project drawing
- Supplied with: Base plate, door, cable entry, lamp arm, anchor bolts and foundation drawing
Request a quotation for Lattice-Brace Single-Arm Street Light Pole
Quantity, destination port and your contact details are enough for us to price it. Tell us the pole height or road class if you have them.
A single arm is carried on a diamond lattice brace beneath it, an open frame rather than a solid gusset. Send the arm reach and the luminaire weight together, because the brace is sized from both.
At a glance
| Section | Steel pole section as drawn — round tapered, octagonal or square tube |
| Arm configuration | 1 arm; lattice (diamond) brace under the arm |
| Material | Steel Q235, Q235B or Q345 |
| Finish | Hot-dip galvanised as standard; galvanised + powder coating to a RAL colour on request |
| Standard heights | 6 m to 12 m; other heights from 3 m upwards produced to the project drawing |
| Supplied with | Base plate, door, cable entry, lamp arm, anchor bolts and foundation drawing |
| Mounting | One arm, welded at the required height and drilled ready for the luminaire |
Where the Lattice-Brace single-arm fits
A single arm braced by an open lattice below it — the lightest way to carry a long reach, because an open truss uses far less steel than a solid bracket of the same stiffness. One arm, 6–12 m, steel section as drawn.
It is the pole for very wide roads where a single-side installation still has to put light across both lanes. The trade-off is maintenance: an open lattice collects debris and needs inspection, and the welds are exposed. Where the site is coastal, weigh that against a closed-section arch.
- Single arm with open lattice bracing; longest reach per kilogram of steel.
- Open truss needs inspection and cleaning — note it in the maintenance plan.
- Confirm the weld and galvanising specification for the environment.
Lattice-Brace Single-Arm Street Light Pole — technical parameters
| Height H | Wall thickness S (mm) | Top Ø D1 (mm) | Bottom Ø D2 (mm) | Base plate F1 (mm) | Weight F2 (kg) |
|---|---|---|---|---|---|
| 6 m | 2.5 / 3 | 60–76 | 135 / 140 | 280×280×12 | 55 |
| 7 m | 2.75 / 3 | 60–76 | 150 | 280×280×12 | 81 |
| 8 m | 3 | 60–76 | 150 / 160 | 280×280×12 | 100 |
| 9 m | 3.25 / 3.50 | 60–76 | 175 / 180 | 300×300×12 · 340×340×14 | 118 |
| 10 m | 3.5 / 3.75 | 60–75 | 180 / 190 | 350×350×12 · 360×360×14/16 | 146 |
| 11 m | 3.5 / 3.75 / 4 | 60–70 / 80 | 180 / 200 / 210 | 350×350×16 · 360×360×16/18 | 165 |
| 12 m | 3.75 / 4 | 60–70 / 80 | 200 / 210 | 350×350×16 · 380×380×16/18/20 | 190 |
Send the road width, the pole height, the luminaire you plan to fit and the lighting hours you need and we will confirm the section, the lattice brace and the base plate.