Street Light Pole

Double-Arm Symmetrical Street Light Pole

Two arms at equal height on opposite sides of a tapered round pole, for symmetrical two-way street lighting

Section: Tapered round / conical
Arm configuration: 2 arms, equal height, opposite sides
Material: Steel Q235, Q235B or Q345
Finish: Hot-dip galvanised as standard; galvanised + powder coating to a RAL colour on request
Standard heights: 6 m to 12 m; other heights from 3 m upwards produced to the project drawing
Supplied with: Base plate, door, cable entry, lamp arm, anchor bolts and foundation drawing

Request a quotation for Double-Arm Symmetrical Street Light Pole

Quantity, destination port and your contact details are enough for us to price it. Tell us the pole height or road class if you have them.

A street light is only as good as the pole it hangs on. Conical poles are cut, bent, welded and galvanised as a single unit, with the base plate, door, cable entry and lamp arm already fitted. Each pole is dimensioned to the luminaire it carries, so the arm height, the top diameter and the base plate all match the light you have chosen.

Standard poles run from 6 m to 12 m; other heights are produced to the project drawing. A square base plate is welded to the pole root and drilled for the anchor bolts, with the weld dressed and the whole assembly galvanised.

At a glance

Section	Tapered round / conical
Arm configuration	2 arms, equal height, opposite sides
Material	Steel Q235, Q235B or Q345
Finish	Hot-dip galvanised as standard; galvanised + powder coating to a RAL colour on request
Standard heights	6 m to 12 m; other heights from 3 m upwards produced to the project drawing
Supplied with	Base plate, door, cable entry, lamp arm, anchor bolts and foundation drawing
Mounting	Two arms, welded at the required height and drilled ready for the luminaire

Where the symmetrical double arm fits

Two arms at equal height on opposite sides of a tapered round shaft — the plain reference configuration for a multi-arm pole. Equal height matters when both arms serve the same task: a carriageway and its opposite lane, or two sides of a divided road, lit to the same photometric result.

Heights 6–12 m with wall thickness from 2.5–3 mm to 3.75–4 mm, Q235/Q235B/Q345, hot-dip galvanised with optional RAL powder coat. The arms are welded at the height you nominate and drilled for the luminaire, so the arm height, reach and head weight all have to be fixed before fabrication.

2 equal-height arms, opposite sides; tapered round section.
Symmetry is the specification — confirm both heads are the same type.
Other heights from 3 m upwards to drawing.