Home / Products / Street Light Pole
Flat-Oval Double-Arm Street Light Pole
Two flat-oval streamlined arms on opposite sides
- Section: Steel pole section as drawn — round tapered, octagonal or square tube
- Arm configuration: 2 arms, opposite sides, equal height; flat-oval streamline section arms
- Material: Steel Q235, Q235B or Q345
- Finish: Hot-dip galvanised as standard; galvanised + powder coating to a RAL colour on request
- Standard heights: 6 m to 12 m; other heights from 3 m upwards produced to the project drawing
- Supplied with: Base plate, door, cable entry, lamp arm, anchor bolts and foundation drawing
Request a quotation for Flat-Oval Double-Arm Street Light Pole
Quantity, destination port and your contact details are enough for us to price it. Tell us the pole height or road class if you have them.
Two flat-oval streamline arms sit on opposite sides at equal height. The flattened section gives a slimmer profile than a round arm, so tell us if the appearance is being matched to an existing scheme.
At a glance
| Section | Steel pole section as drawn — round tapered, octagonal or square tube |
| Arm configuration | 2 arms, opposite sides, equal height; flat-oval streamline section arms |
| Material | Steel Q235, Q235B or Q345 |
| Finish | Hot-dip galvanised as standard; galvanised + powder coating to a RAL colour on request |
| Standard heights | 6 m to 12 m; other heights from 3 m upwards produced to the project drawing |
| Supplied with | Base plate, door, cable entry, lamp arm, anchor bolts and foundation drawing |
| Mounting | Two arms, welded at the required height and drilled ready for the luminaire |
Where the Flat-Oval double-arm fits
Arms with a flattened oval section: wider than they are deep, so the bracket reads as a ribbon from below while still being a closed structural section. Two arms, opposite sides, equal height, steel pole section as drawn.
The oval section is stiffer in the vertical plane where the luminaire load acts, which is why it holds a slightly longer reach than a round tube of the same weight. It is a designed pole — chosen when the arm itself is meant to be seen — so the finish (galvanised plus a RAL colour) is part of the specification.
- Flat-oval arm section; two arms, equal height, opposite sides.
- Vertical stiffness suits longer reaches than a round tube of equal weight.
- Agree the RAL colour, and check the finish warranty on coastal sites.
Flat-Oval Double-Arm Street Light Pole — technical parameters
| Height H | Wall thickness S (mm) | Top Ø D1 (mm) | Bottom Ø D2 (mm) | Base plate F1 (mm) | Weight F2 (kg) |
|---|---|---|---|---|---|
| 6 m | 2.5 / 3 | 60–76 | 135 / 140 | 280×280×12 | 55 |
| 7 m | 2.75 / 3 | 60–76 | 150 | 280×280×12 | 81 |
| 8 m | 3 | 60–76 | 150 / 160 | 280×280×12 | 100 |
| 9 m | 3.25 / 3.50 | 60–76 | 175 / 180 | 300×300×12 · 340×340×14 | 118 |
| 10 m | 3.5 / 3.75 | 60–75 | 180 / 190 | 350×350×12 · 360×360×14/16 | 146 |
| 11 m | 3.5 / 3.75 / 4 | 60–70 / 80 | 180 / 200 / 210 | 350×350×16 · 360×360×16/18 | 165 |
| 12 m | 3.75 / 4 | 60–70 / 80 | 200 / 210 | 350×350×16 · 380×380×16/18/20 | 190 |
Send the road width, the pole height, the luminaires you plan to fit and the lighting hours you need and we will confirm the section, the arm section and the base plate.