Home / Products / Street Light Pole
Self-Bent Double-Arm Street Light Pole
Two self-bent arms on opposite sides with a decorative finial at the top
- Section: Steel pole section as drawn — round tapered, octagonal or square tube
- Arm configuration: 2 arms, opposite sides, equal height; self-bent arms with decorative finial
- Material: Steel Q235, Q235B or Q345
- Finish: Hot-dip galvanised as standard; galvanised + powder coating to a RAL colour on request
- Standard heights: 6 m to 12 m; other heights from 3 m upwards produced to the project drawing
- Supplied with: Base plate, door, cable entry, lamp arm, anchor bolts and foundation drawing
Request a quotation for Self-Bent Double-Arm Street Light Pole
Quantity, destination port and your contact details are enough for us to price it. Tell us the pole height or road class if you have them.
Two self-bent arms leave the pole on opposite sides at the same height and finish with a decorative finial. The bend is formed in the arm itself rather than welded on, so send the arm profile you want matched.
At a glance
| Section | Steel pole section as drawn — round tapered, octagonal or square tube |
| Arm configuration | 2 arms, opposite sides, equal height; self-bent arms with decorative finial |
| Material | Steel Q235, Q235B or Q345 |
| Finish | Hot-dip galvanised as standard; galvanised + powder coating to a RAL colour on request |
| Standard heights | 6 m to 12 m; other heights from 3 m upwards produced to the project drawing |
| Supplied with | Base plate, door, cable entry, lamp arm, anchor bolts and foundation drawing |
| Mounting | Two arms, welded at the required height and drilled ready for the luminaire |
Where the Self-Bent double-arm fits
Each arm is bent from a single member rather than assembled from a tube and a bracket — fewer welds, fewer places for the finish to fail, and a smooth continuous line from shaft to luminaire. Two arms on opposite sides at equal height.
It is the practical decorative choice: the form is clean without being ornamental, so it fits both residential streets and light-commercial roads. Steel section as drawn, 6–12 m, hot-dip galvanised, RAL optional. Compare with the symmetrical double-arm, which is built rather than bent.
- Two one-piece bent arms, equal height, opposite sides.
- Fewer welds — a finish-durability advantage on coastal or humid sites.
- Confirm the bend radius suits the luminaire's mounting spigot.
Self-Bent Double-Arm Street Light Pole — technical parameters
| Height H | Wall thickness S (mm) | Top Ø D1 (mm) | Bottom Ø D2 (mm) | Base plate F1 (mm) | Weight F2 (kg) |
|---|---|---|---|---|---|
| 6 m | 2.5 / 3 | 60–76 | 135 / 140 | 280×280×12 | 55 |
| 7 m | 2.75 / 3 | 60–76 | 150 | 280×280×12 | 81 |
| 8 m | 3 | 60–76 | 150 / 160 | 280×280×12 | 100 |
| 9 m | 3.25 / 3.50 | 60–76 | 175 / 180 | 300×300×12 · 340×340×14 | 118 |
| 10 m | 3.5 / 3.75 | 60–75 | 180 / 190 | 350×350×12 · 360×360×14/16 | 146 |
| 11 m | 3.5 / 3.75 / 4 | 60–70 / 80 | 180 / 200 / 210 | 350×350×16 · 360×360×16/18 | 165 |
| 12 m | 3.75 / 4 | 60–70 / 80 | 200 / 210 | 350×350×16 · 380×380×16/18/20 | 190 |
Send the road width, the pole height, the luminaires you plan to fit and the lighting hours you need and we will confirm the section, the arm profile and the base plate.