Street Light Pole

Cross Four-Arm Street Light Pole

Four arms in a cross layout at equal height on an octagonal pole, for intersections and large open areas

Section: Octagonal (8-sided)
Arm configuration: 4 arms, cross layout, equal height
Material: Steel Q235, Q235B or Q345
Finish: Hot-dip galvanised as standard; galvanised + powder coating to a RAL colour on request
Standard heights: 6 m to 12 m; other heights from 3 m upwards produced to the project drawing
Supplied with: Base plate, door, cable entry, lamp arm, anchor bolts and foundation drawing

Request a quotation for Cross Four-Arm Street Light Pole

Quantity, destination port and your contact details are enough for us to price it. Tell us the pole height or road class if you have them.

Octagonal poles use the same dimensional table as the conical range, so the two can be mixed within one project. The eight-sided section gives a flatter face for welded arms and signage, which is why it is often specified for main roads and where traffic signs are mounted on the lighting pole.

Supplied with base plate, door, cable entry and lamp arm, hot-dip galvanised as standard, or galvanised and powder coated to a RAL colour when the specification calls for it.

At a glance

Section	Octagonal (8-sided)
Arm configuration	4 arms, cross layout, equal height
Material	Steel Q235, Q235B or Q345
Finish	Hot-dip galvanised as standard; galvanised + powder coating to a RAL colour on request
Standard heights	6 m to 12 m; other heights from 3 m upwards produced to the project drawing
Supplied with	Base plate, door, cable entry, lamp arm, anchor bolts and foundation drawing
Mounting	Four arms, welded at the required height and drilled ready for the luminaire

Where the 4-arm cross fits

Four arms in a cross at equal height on an octagonal shaft — the maximum coverage from a single pole, lighting four directions without a second foundation. It is the configuration for crossroads, wide junctions and open yards where one pole has to serve the whole intersection.

6–12 m, octagonal section, wall thickness stepping with height, hot-dip galvanised with optional RAL. Four heads at one height concentrate a large bending moment at the base and a large wind area at the top; give the head weight and the design wind speed, and the section follows.

4 arms, cross layout, equal height; octagonal shaft.
Largest wind area in the multi-arm range — confirm the base design.
Check the cable route through the pole to four heads without congestion.