Home / Products / Street Light Pole
Large Arch Single-Arm Street Light Pole
Single arm formed as one continuous large-radius arch from the pole top
- Section: Steel pole section as drawn — round tapered, octagonal or square tube
- Arm configuration: 1 arm; continuous large-radius arch ≈2.0 m reach
- Material: Steel Q235, Q235B or Q345
- Finish: Hot-dip galvanised as standard; galvanised + powder coating to a RAL colour on request
- Standard heights: 6 m to 12 m; other heights from 3 m upwards produced to the project drawing
- Supplied with: Base plate, door, cable entry, lamp arm, anchor bolts and foundation drawing
Request a quotation for Large Arch Single-Arm Street Light Pole
Quantity, destination port and your contact details are enough for us to price it. Tell us the pole height or road class if you have them.
A single continuous large-radius arch carries the luminaire with a reach of about 2.0 m, the shape that puts the head further out over the carriageway. With a reach this long the setback from the kerb changes noticeably, so settle the projection first.
At a glance
| Section | Steel pole section as drawn — round tapered, octagonal or square tube |
| Arm configuration | 1 arm; continuous large-radius arch ≈2.0 m reach |
| Material | Steel Q235, Q235B or Q345 |
| Finish | Hot-dip galvanised as standard; galvanised + powder coating to a RAL colour on request |
| Standard heights | 6 m to 12 m; other heights from 3 m upwards produced to the project drawing |
| Supplied with | Base plate, door, cable entry, lamp arm, anchor bolts and foundation drawing |
| Mounting | One arm, welded at the required height and drilled ready for the luminaire |
Where the Large Arch single-arm fits
The heaviest single-arm form here: a full arc that carries the luminaire well out over the carriageway on one side. Where a crescent keeps the head near the pole, the large arch is built to reach — it is the single-arm answer for a wide road when a second arm is not wanted.
Steel section as drawn, 6–12 m, galvanised. The arc's reach is what sets the wall thickness and the base plate, so those two have to be sized against the luminaire weight and the wind load rather than copied from a smaller pole. For a lighter arc on the same duty, see the Gull Arc.
- Single large-arc arm; long reach over the carriageway.
- Wall thickness and base plate follow from reach × luminaire weight × wind.
- State the luminaire weight in the enquiry — it changes the steel.
Large Arch Single-Arm Street Light Pole — technical parameters
| Height H | Wall thickness S (mm) | Top Ø D1 (mm) | Bottom Ø D2 (mm) | Base plate F1 (mm) | Weight F2 (kg) |
|---|---|---|---|---|---|
| 6 m | 2.5 / 3 | 60–76 | 135 / 140 | 280×280×12 | 55 |
| 7 m | 2.75 / 3 | 60–76 | 150 | 280×280×12 | 81 |
| 8 m | 3 | 60–76 | 150 / 160 | 280×280×12 | 100 |
| 9 m | 3.25 / 3.50 | 60–76 | 175 / 180 | 300×300×12 · 340×340×14 | 118 |
| 10 m | 3.5 / 3.75 | 60–75 | 180 / 190 | 350×350×12 · 360×360×14/16 | 146 |
| 11 m | 3.5 / 3.75 / 4 | 60–70 / 80 | 180 / 200 / 210 | 350×350×16 · 360×360×16/18 | 165 |
| 12 m | 3.75 / 4 | 60–70 / 80 | 200 / 210 | 350×350×16 · 380×380×16/18/20 | 190 |
Send the road width, the pole height, the luminaire you plan to fit and the lighting hours you need and we will confirm the section, the arch projection and the base plate.