Home / Products / Street Light Pole
Tie-Rod Straight Arm Street Light Pole
Single horizontal arm with a rigid tie rod above it
- Section: Steel pole section as drawn — round tapered, octagonal or square tube
- Arm configuration: 1 arm; horizontal straight arm with tie rod above ≈1.5 m reach
- Material: Steel Q235, Q235B or Q345
- Finish: Hot-dip galvanised as standard; galvanised + powder coating to a RAL colour on request
- Standard heights: 6 m to 12 m; other heights from 3 m upwards produced to the project drawing
- Supplied with: Base plate, door, cable entry, lamp arm, anchor bolts and foundation drawing
Request a quotation for Tie-Rod Straight Arm Street Light Pole
Quantity, destination port and your contact details are enough for us to price it. Tell us the pole height or road class if you have them.
A horizontal straight arm carries the luminaire with a tie rod above it, so the arm is held at the top as well as at the root. The tie rod is the element to agree from the luminaire weight.
At a glance
| Section | Steel pole section as drawn — round tapered, octagonal or square tube |
| Arm configuration | 1 arm; horizontal straight arm with tie rod above ≈1.5 m reach |
| Material | Steel Q235, Q235B or Q345 |
| Finish | Hot-dip galvanised as standard; galvanised + powder coating to a RAL colour on request |
| Standard heights | 6 m to 12 m; other heights from 3 m upwards produced to the project drawing |
| Supplied with | Base plate, door, cable entry, lamp arm, anchor bolts and foundation drawing |
| Mounting | One arm, welded at the required height and drilled ready for the luminaire |
Where the Tie-Rod straight arm fits
A straight arm carried by a tie rod from higher up the shaft — the classic structural answer to reach: the rod takes the tension, so the arm can be longer and slimmer than a cantilever of the same strength. It reads as engineering rather than decoration, which is why it suits arterial roads and industrial estates.
Steel section as drawn, 6–12 m, Q235/Q235B/Q345, hot-dip galvanised. The rod anchorage and its adjustment are the parts to check on the drawing: a tie rod that cannot be tensioned on site leaves the arm hanging on the weld alone.
- Straight arm with tie rod; single side.
- Rod anchorage must be adjustable on site — ask for the detail.
- Good solution for long reaches without a truss.
Tie-Rod Straight Arm Street Light Pole — technical parameters
| Height H | Wall thickness S (mm) | Top Ø D1 (mm) | Bottom Ø D2 (mm) | Base plate F1 (mm) | Weight F2 (kg) |
|---|---|---|---|---|---|
| 6 m | 2.5 / 3 | 60–76 | 135 / 140 | 280×280×12 | 55 |
| 7 m | 2.75 / 3 | 60–76 | 150 | 280×280×12 | 81 |
| 8 m | 3 | 60–76 | 150 / 160 | 280×280×12 | 100 |
| 9 m | 3.25 / 3.50 | 60–76 | 175 / 180 | 300×300×12 · 340×340×14 | 118 |
| 10 m | 3.5 / 3.75 | 60–75 | 180 / 190 | 350×350×12 · 360×360×14/16 | 146 |
| 11 m | 3.5 / 3.75 / 4 | 60–70 / 80 | 180 / 200 / 210 | 350×350×16 · 360×360×16/18 | 165 |
| 12 m | 3.75 / 4 | 60–70 / 80 | 200 / 210 | 350×350×16 · 380×380×16/18/20 | 190 |
Send the road width, the pole height, the luminaire you plan to fit and the lighting hours you need and we will confirm the section, the tie-rod arrangement and the base plate.