Home  /  Products  /  Solar Home & Off-Grid Systems

APOLLO A Series Inverter with Energy Storage
Solar Home System

APOLLO A Series Inverter with Energy Storage

Six-module stack for the 230 V market: a 6 kW or 12 kW inverter above 51.2 V battery modules from 5.12 kWh to 30.72 kWh, assembled on site and connected through one AC input, one PV input and one battery bus.

  • Rated power: 6 kW / 12 kW
  • Battery: 51.2 V, 5120 Wh per module
  • Capacity: 5.12 kWh to 30.72 kWh
  • AC output: 230 VAC
  • Efficiency: ≥98%
  • Max charge / discharge: 200 A / 200 A
  • PV input: 9000 W, 80–500 VDC
  • Cycle life: ≥6000 cycles
Request a QuoteChat on WhatsApp

Request a quotation for APOLLO A Series Inverter with Energy Storage

Quantity, destination port and your contact details are enough for us to price it. Tell us the pole height or road class if you have them.

We use your details only to answer this enquiry.

Six-module stack for the 230 V market: a 6 kW or 12 kW inverter above 51.2 V battery modules from 5.12 kWh to 30.72 kWh, assembled on site and connected through one AC input, one PV input and one battery bus.

At a glance

ModelSCAP-A-51.2-100 / 200 / 300 / 400 / 500 / 600
Rated power6 kW / 12 kW
AC rated voltage230 VAC
Rated frequency50 / 60 Hz
Efficiency≥98%
Transfer time10 ms
WaveformPure sinusoidal wave
Battery overvoltage58.4 V
Battery undervoltage alarm45 V
Constant voltage charge58.4 V
Float voltage56 V
Max charging current100 A / 160 A

Where the Apollo A fits

A six-module stack for the 230 V market: a 6 kW or 12 kW inverter sitting above 51.2 V battery modules from 5.12 kWh to 30.72 kWh, assembled on site and connected through one AC input, one PV input and one battery bus. Because it arrives as modules rather than a sealed cabinet, the same product covers a small shop and a large house without a different SKU.

Cycle life is ≥6,000 at 0.5C to 80% end of life, and depth of discharge is 95%. Compared with the Apollo B — a three-module cabinet — the A series scales further but needs the site to do the stacking; the Apollo C is the two-module version for the largest single-unit capacities.

  • 6 kW or 12 kW inverter; 5.12–30.72 kWh in 51.2 V modules.
  • Efficiency ≥98%; RS485 to the BMS, USB at the inverter.
  • Site assembly required — confirm who is doing the stacking and commissioning.

The full table, including every model in the range, is on the Technical Parameters tab.

APOLLO A Series Inverter with Energy Storage — technical parameters

Inverter
ModelSCAP-A-51.2-100 / 200 / 300 / 400 / 500 / 600
Rated power6 kW / 12 kW
AC rated voltage230 VAC
Rated frequency50 / 60 Hz
Efficiency≥98%
Transfer time10 ms
WaveformPure sinusoidal wave
Battery overvoltage58.4 V
Battery undervoltage alarm45 V
Constant voltage charge58.4 V
Float voltage56 V
Max charging current100 A / 160 A
Communication interfaceUSB (inverter) / RS485 (BMS)
Dimension60 × 40.5 × 18 cm / 60 × 40.5 × 22 cm
AC input
Nominal voltage230 VAC
Voltage range90–280 VAC
Rated frequency50 / 60 Hz
Frequency range40–70 Hz
Rated current60 A
Max AC current100 A / 160 A
PV input
Max voltage500 V
Optimum voltage300–400 V
Voltage range80–500 VDC
Max power27 A / 9000 W (6 kW) · 27 A + 27 A / 7500 W × 2 (12 kW)
Battery
Rated capacity5120 / 10240 / 15360 / 20480 / 25600 / 30720 Wh
Nominal voltage51.2 V
Discharge voltage range43.2–58.4 V
Standard charging current50 A / 100 A
Max charging current100 A / 200 A
Max discharging current100 A / 200 A
Depth of discharge95%
Communication interfaceCAN / RS485
Cycle life≥6000 cycles, 25±2 °C, 0.5C, EOL80%
Working temperatureCharge 0–50 °C, discharge −20–60 °C
Storage temperature−20–60 °C
Dimension60 × 40.5 × 19.5 cm

Tell us the daily load, the backup hours you need and the PV array size and we will confirm the model and the configuration for your project.

Other Solar Home Systems models