Home  /  Products  /  Solar Home & Off-Grid Systems

APOLLO C Series Inverter with Energy Storage (US Version)
Solar Home System

APOLLO C Series Inverter with Energy Storage (US Version)

Two-module cabinet for the 110 V split-phase market: a 10 kW inverter with 15360 Wh or 30720 Wh of 51.2 V battery capacity, factory-assembled as a floor-standing unit with castors.

  • Rated power: 10 kW
  • AC output: 110 V / 230 V (split phase)
  • Capacity: 15.36 kWh / 30.72 kWh
  • PV input: 6400 W max, 60–150 V
  • Efficiency: ≥98%
  • Cycle life: ≥8000 cycles
Request a QuoteChat on WhatsApp

Request a quotation for APOLLO C Series Inverter with Energy Storage (US Version)

Quantity, destination port and your contact details are enough for us to price it. Tell us the pole height or road class if you have them.

We use your details only to answer this enquiry.

Two-module cabinet for the 110 V split-phase market: a 10 kW inverter with 15360 Wh or 30720 Wh of 51.2 V battery capacity, factory-assembled as a floor-standing unit with castors.

At a glance

ModelSCAP-51.2-300 (10 kW + 15 kWh) / SCAP-51.2-600 (10 kW + 30 kWh)
Rated power10 kW
AC rated voltage110 V / 230 V (split phase)
Rated frequency50 / 60 Hz
Efficiency≥98%
Transfer time10 ms
WaveformPure sinusoidal wave
Battery overvoltage58.4 V
Battery undervoltage alarm45 V
Constant voltage charge58.4 V
Float voltage56 V
Max charging current160 A

Where the Apollo C US fits

The 110 V split-phase version of the Apollo C cabinet: a 10 kW inverter with 15,360 Wh or 30,720 Wh of 51.2 V battery, factory-assembled on castors. Split phase matters in North American and some Latin American installations — a 230 V single-phase cabinet cannot feed two 110 V legs, so this is a different electrical product, not a variant label.

Cell life is ≥8,000 cycles at 0.5C, and the BMS communicates over CAN or RS485. For a 230 V market the equivalent is the standard Apollo C; where the load is smaller, the Apollo B cabinet covers 5–20 kWh at 6 kW.

  • 10 kW, 110 V / 230 V split phase; 15,360 or 30,720 Wh at 51.2 V.
  • AC input 50 A rated / 100 A max, 50/60 Hz.
  • Confirm the utility configuration with the installer before ordering — this is the one model where the wrong phase is a return shipment.

The full table, including every model in the range, is on the Technical Parameters tab.

APOLLO C Series Inverter with Energy Storage (US Version) — technical parameters

ModelSCAP-51.2-300 (10 kW + 15 kWh) / SCAP-51.2-600 (10 kW + 30 kWh)
Rated power10 kW
AC rated voltage110 V / 230 V (split phase)
Rated frequency50 / 60 Hz
Efficiency≥98%
Transfer time10 ms
WaveformPure sinusoidal wave
Battery overvoltage58.4 V
Battery undervoltage alarm45 V
Constant voltage charge58.4 V
Float voltage56 V
Max charging current160 A
CommunicationRS232 (inverter) / RS485 (BMS)
AC input voltage110 VAC nominal, 77–135 VAC
AC input frequency50 / 60 Hz, 40–70 Hz
AC input current50 A rated / 100 A max
PV max voltage150 V
PV optimum voltage60–105 V
PV max power6400 W
Battery rated capacity15360 Wh (300 Ah) / 30720 Wh (600 Ah)
Battery nominal voltage51.2 V
Discharge voltage range43.2–58.4 V
Max charge / discharge current200 A / 200 A
Depth of discharge95%
Battery communicationCAN / RS485
Cycle life≥8000 cycles, 25±2 °C, 0.5C, EOL80%
Working temperatureCharge 0–50 °C, discharge −20–60 °C
Storage temperature−20–60 °C
Dimension70 × 26 × 51 cm

Tell us the daily load, the backup hours you need and the PV array size and we will confirm the model and the configuration for your project.

Other Solar Home Systems models