Home / Products / Solar Home & Off-Grid Systems

ATHENA C Series LiFePO4 Battery
Highest-capacity cabinet in the ATHENA range: 30720 Wh or 34304 Wh at 51.2 V, with 300 A peak charge and discharge on the 670 Ah model for whole-house backup.
- Chemistry: LiFePO4
- Nominal voltage: 51.2 V
- Capacity: 30.72 kWh / 34.30 kWh
- Charging current: 100 A / 150 A standard
- Max charge / discharge: 200 A / 300 A
- Cycle life: ≥8000 cycles
Request a quotation for ATHENA C Series LiFePO4 Battery
Quantity, destination port and your contact details are enough for us to price it. Tell us the pole height or road class if you have them.
Highest-capacity cabinet in the ATHENA range: 30720 Wh or 34304 Wh at 51.2 V, with 300 A peak charge and discharge on the 670 Ah model for whole-house backup.
At a glance
| Model | SCAE-C-51.2-600 / SCAE-C-51.2-670 |
| Rated capacity | 30720 Wh (600 Ah) / 34304 Wh (670 Ah) |
| Nominal voltage | 51.2 V |
| Discharge voltage range | 43.2–58.4 V |
| Standard charging current | 100 A / 150 A |
| Max charging current | 200 A / 300 A |
| Max discharging current | 200 A / 300 A |
| Depth of discharge | 95% |
| Communication interface | CAN / RS485 |
| Cycle life | ≥8000 cycles, 25±2 °C, 0.5C, EOL80% |
| Working temperature | Charge 0–50 °C, discharge −20–60 °C |
| Storage temperature | −20–60 °C |
Where the ATHENA C fits
The largest cabinet in the ATHENA range: 30,720 Wh or 34,304 Wh at 51.2 V, with 300 A peak charge and discharge on the 670 Ah model. It is built for whole-house backup where the load includes air conditioning and an electric water heater, and for small commercial premises that need a day of autonomy.
At 81 × 40 × 75.5 cm it is a two-person delivery, and the 300 A capability is what allows a 15 kW-class inverter to run at full output. Below it, the ATHENA B covers 15–17 kWh at 200 A; above a single cabinet, the rack systems go to 257.2 kWh per stack.
- 30,720 / 34,304 Wh; 51.2 V; 200 A continuous, 300 A peak on the larger model.
- 16S configuration; CAN / RS485; 95% DoD.
- Confirm the inverter's maximum discharge current before pairing.
The full table, including every model in the range, is on the Technical Parameters tab.
ATHENA C Series LiFePO4 Battery — technical parameters
| Model | SCAE-C-51.2-600 / SCAE-C-51.2-670 |
| Rated capacity | 30720 Wh (600 Ah) / 34304 Wh (670 Ah) |
| Nominal voltage | 51.2 V |
| Discharge voltage range | 43.2–58.4 V |
| Standard charging current | 100 A / 150 A |
| Max charging current | 200 A / 300 A |
| Max discharging current | 200 A / 300 A |
| Depth of discharge | 95% |
| Communication interface | CAN / RS485 |
| Cycle life | ≥8000 cycles, 25±2 °C, 0.5C, EOL80% |
| Working temperature | Charge 0–50 °C, discharge −20–60 °C |
| Storage temperature | −20–60 °C |
| Battery chemistry | LiFePO4 |
| Cell configuration | 16S |
| Round-trip efficiency | ≥95% |
| Self-discharge | ≤3% per month at 25 °C |
| BMS protection | Over-charge, over-discharge, over-current, over-temperature, short circuit |
| Operating humidity | 5–85% RH, non-condensing |
| Operating altitude | ≤2000 m |
| Installation | Floor standing cabinet |
| Design life | ≥10 years at 25 °C |
| Dimension | 81 × 40 × 75.5 cm |
Tell us the daily load, the backup hours you need and the PV array size and we will confirm the model and the configuration for your project.