APOLLO A Series Inverter with Energy Storage

Six-module stack for the 230 V market: a 6 kW or 12 kW inverter above 51.2 V battery modules from 5.12 kWh to 30.72 kWh, assembled on site and connected through one AC input, one PV input and one battery bus.

Rated power: 6 kW / 12 kW
Battery: 51.2 V, 5120 Wh per module
Capacity: 5.12 kWh to 30.72 kWh
AC output: 230 VAC
Efficiency: ≥98%
Max charge / discharge: 200 A / 200 A
PV input: 9000 W, 80–500 VDC
Cycle life: ≥6000 cycles

Request a quotation for APOLLO A Series Inverter with Energy Storage

Quantity, destination port and your contact details are enough for us to price it. Tell us the pole height or road class if you have them.

At a glance

Model	SCAP-A-51.2-100 / 200 / 300 / 400 / 500 / 600
Rated power	6 kW / 12 kW
AC rated voltage	230 VAC
Rated frequency	50 / 60 Hz
Efficiency	≥98%
Transfer time	10 ms
Waveform	Pure sinusoidal wave
Battery overvoltage	58.4 V
Battery undervoltage alarm	45 V
Constant voltage charge	58.4 V
Float voltage	56 V
Max charging current	100 A / 160 A

Where the Apollo A fits

A six-module stack for the 230 V market: a 6 kW or 12 kW inverter sitting above 51.2 V battery modules from 5.12 kWh to 30.72 kWh, assembled on site and connected through one AC input, one PV input and one battery bus. Because it arrives as modules rather than a sealed cabinet, the same product covers a small shop and a large house without a different SKU.

Cycle life is ≥6,000 at 0.5C to 80% end of life, and depth of discharge is 95%. Compared with the Apollo B — a three-module cabinet — the A series scales further but needs the site to do the stacking; the Apollo C is the two-module version for the largest single-unit capacities.

6 kW or 12 kW inverter; 5.12–30.72 kWh in 51.2 V modules.
Efficiency ≥98%; RS485 to the BMS, USB at the inverter.
Site assembly required — confirm who is doing the stacking and commissioning.

The full table, including every model in the range, is on the Technical Parameters tab.