Home  /  Products  /  Solar Home & Off-Grid Systems

APOLLO C Series Inverter with Energy Storage
Solar Home System

APOLLO C Series Inverter with Energy Storage

Two-module cabinet for larger loads on a 230 V supply: a 6 kW or 12 kW inverter paired with 15360 Wh to 30720 Wh of 51.2 V battery capacity, in a floor-standing format with castors.

  • Rated power: 6 kW / 12 kW
  • Battery: 51.2 V
  • Capacity: 15.36 kWh to 30.72 kWh
  • AC output: 230 VAC
  • Efficiency: ≥98%
  • Max charge / discharge: 200 A / 200 A
  • PV input: 9000 W / 15000 W
  • Cycle life: ≥8000 cycles
Request a QuoteChat on WhatsApp

Request a quotation for APOLLO C Series Inverter with Energy Storage

Quantity, destination port and your contact details are enough for us to price it. Tell us the pole height or road class if you have them.

We use your details only to answer this enquiry.

Two-module cabinet for larger loads on a 230 V supply: a 6 kW or 12 kW inverter paired with 15360 Wh to 30720 Wh of 51.2 V battery capacity, in a floor-standing format with castors.

At a glance

ModelSCAP-C-51.2-300 (6 kW) / SCAP-C-51.2-300 (12 kW) / SCAP-C-51.2-600 (12 kW)
Rated power6 kW / 12 kW
AC rated voltage230 VAC
Rated frequency60 Hz
Efficiency≥98%
Transfer time10 ms
WaveformPure sinusoidal wave
Battery overvoltage58.4 V
Battery undervoltage alarm45 V
Constant voltage charge58.4 V
Float voltage56 V
Max charging current120 A / 160 A

Where the Apollo C fits

Two modules instead of three, for the largest capacities in the 230 V range: 15.36–30.72 kWh at 51.2 V, paired with a 6 kW or 12 kW inverter, in a floor-standing cabinet on castors. The cells are rated ≥8,000 cycles at 0.5C — higher than the 6,000-cycle A and B series — which matters on a daily-cycle duty.

Peak discharge reaches 200 A, so the cabinet can carry a 12 kW inverter's surge without tripping. Compared with the Apollo B it doubles the usable energy in a similar footprint; for the 110 V split-phase market, see the US version.

  • Two-module cabinet; 15.36 or 30.72 kWh; 6 or 12 kW inverter.
  • ≥8,000 cycles, 95% DoD, ≥98% efficiency.
  • Confirm the AC configuration — 230 V single phase is the default, the US unit is split phase.

The full table, including every model in the range, is on the Technical Parameters tab.

APOLLO C Series Inverter with Energy Storage — technical parameters

Inverter
ModelSCAP-C-51.2-300 (6 kW) / SCAP-C-51.2-300 (12 kW) / SCAP-C-51.2-600 (12 kW)
Rated power6 kW / 12 kW
AC rated voltage230 VAC
Rated frequency60 Hz
Efficiency≥98%
Transfer time10 ms
WaveformPure sinusoidal wave
Battery overvoltage58.4 V
Battery undervoltage alarm45 V
Constant voltage charge58.4 V
Float voltage56 V
Max charging current120 A / 160 A
Communication interfaceUSB (inverter) / RS485 (BMS)
Dimension70 × 26 × 51 cm
AC input
Nominal voltage230 VAC
Voltage range90–280 VAC
Rated frequency50 / 60 Hz
Frequency range40–70 Hz
Rated current60 A
Max AC current120 A / 160 A
PV input
Max voltage500 V
Optimum voltage300–400 V
Voltage range80–500 VDC
Max power27 A / 9000 W (6 kW) · 27 A + 27 A / 15000 W (12 kW)
Battery
Rated capacity15360 Wh (300 Ah) / 15360 Wh (300 Ah) / 30720 Wh (600 Ah)
Nominal voltage51.2 V
Discharge voltage range43.2–58.4 V
Standard charging current100 A
Max charging current200 A
Max discharging current200 A
Depth of discharge95%
Communication interfaceCAN / RS485
Cycle life≥8000 cycles, 25±2 °C, 0.5C, EOL80%
Working temperatureCharge 0–50 °C, discharge −20–60 °C
Storage temperature−20–60 °C
Dimension70 × 26 × 51 cm

Tell us the daily load, the backup hours you need and the PV array size and we will confirm the model and the configuration for your project.

Other Solar Home Systems models