Home / Products / Flood Light Poles
Lifting High Mast, 8–16 Floodlights
Lifting high mast light carrying 16 floodlights, on a hot-dip galvanised steel pole supplied with the base plate, the anchor bolts and the foundation drawing.
- Section: Round conical (tapered round) steel pole
- Crown type: Internally lifting crown with winch
- Crown frame: Lifting frame carrying 16 floodlights
- Standard heights: 15 m to 30 m; other heights produced to the project drawing
- Material: Steel Q235 or Q355
- Finish: Hot-dip galvanised as standard
- Supplied with: Base plate, anchor bolts, earthing terminal and foundation drawing
- Mounting: Crown frame welded to the pole top and drilled ready for the floodlights
Request a quotation for Lifting High Mast, 8–16 Floodlights
Quantity, destination port and your contact details are enough for us to price it. Tell us the pole height or road class if you have them.
Lifting high mast lights are specified where a large area has to be lit from a single point — stadiums, ports, freight yards, highways and industrial sites. This pole carries a lifting crown frame with 8 or 16 floodlights on a winch carriage, so the whole area is covered from one foundation.
The pole is delivered hot-dip galvanised with the base plate welded on, the anchor bolts and the foundation drawing. The crown frame is drilled to match the floodlight brackets, and the pole door gives access to the wiring and the earth terminal.
At a glance
| Section | Round conical (tapered round) steel pole |
| Crown type | Internally lifting crown with winch |
| Crown frame | Lifting frame carrying 16 floodlights |
| Standard heights | 15 m to 30 m; other heights produced to the project drawing |
| Material | Steel Q235 or Q355 |
| Finish | Hot-dip galvanised as standard |
| Supplied with | Base plate, anchor bolts, earthing terminal and foundation drawing |
| Mounting | Crown frame welded to the pole top and drilled ready for the floodlights |
Why a lifting mast, and what it changes
The crown sits on a carriage that is lowered to ground level on a winch, so lamps are re-aimed, replaced and cleaned without anyone climbing. That single capability drives the whole specification: it removes the need for a ladder, a working platform or a maintenance contract with height access, and it is usually the reason this mast is chosen over a fixed crown of the same head count.
| Heads | Layout | Where it is usually specified | Watch |
|---|---|---|---|
| 8 | Ring of eight on the lowered carriage | Yards and compounds where nobody is authorised to work at height | Carriage plus winch adds weight and cost over a fixed crown |
| 16 | Two rings of eight on the carriage | Ports, terminals and large yards with in-house maintenance teams | Heaviest moving assembly in the range; brake and cable are safety items |
A lifting mast is only as good as its maintenance routine. The winch brake, the guide rails and the cable are the parts that fail, and they fail silently — ask for the inspection interval and the spare parts list with the quotation, not after delivery.
What to send with the enquiry
- Mast height and head count; state that a lifting carriage is required.
- Who will operate and inspect the winch — it changes the documentation supplied.
- Luminaire weight per head; the carriage is rated, not unlimited.
- Design wind speed, or site location.
Crown types compared
The crown frame is welded to the pole top before galvanising, so the number of floodlights is fixed at order and cannot be increased on site. The table below compares the crown types we build; the row in bold is the range on this page.
| Crown frame | Floodlights | Access | Mounting note |
|---|---|---|---|
| Triangular | 3–9 | Fixed | Three faces at 120°; each added floodlight lengthens its arm |
| Ring Crown | 4–10 | Fixed, or ladder-access | Heads on a circular ring; the most common choice for yards and terminals |
| Double Ring | 12 | Fixed | Two concentric rings; more heads without lengthening a single arm |
| Single Side | 4–8 | Fixed | All heads on one side; used where the mast stands at the edge of the lit area |
| Hexagonal | 6–18 | Fixed | Six faces; carries the highest head count of the fixed crowns |
| Double Tier | 8–16 | Fixed | Two levels; the lower tier lights the base of the mast |
| Stadium Matrix | 6–12 | Fixed | Rectangular matrix frame aimed at a pitch or arena |
| Lifting Ring | 8–16 | Internal lifting device | Crown lowered to ground level for maintenance without a platform |
All crown types share the same mast specification: round conical section, Q235 or Q355 steel, hot-dip galvanised, 15–30 m standard heights, supplied with base plate, anchor bolts, earthing terminal and foundation drawing. Head counts outside the ranges shown are built to the project drawing.
Lifting High Mast, 8–16 Floodlights — technical parameters
| Section | Round conical (tapered round) steel pole |
| Crown type | Internally lifting crown with winch |
| Crown frame | Lifting frame carrying 16 floodlights |
| Standard heights | 15 m to 30 m; other heights produced to the project drawing |
| Material | Steel Q235 or Q355 |
| Finish | Hot-dip galvanised as standard |
| Supplied with | Base plate, anchor bolts, earthing terminal and foundation drawing |
| Mounting | Crown frame welded to the pole top and drilled ready for the floodlights |
| Crown options | Fixed, ladder-access or internally lifting crown; RAL powder coating on request |
| Pole section | Diameter, wall thickness and base plate confirmed to the wind zone at your site |
Tell us the pole height, the number of floodlights, the mounting height and the wind zone and we will confirm the section, the wall thickness, the base plate and the anchor bolts for your project.