Home / Products / Flood Light Poles
Stadium Matrix High Mast, 6–12 Floodlights
Stadium Matrix high mast light carrying 12 floodlights, on a hot-dip galvanised steel pole supplied with the base plate, the anchor bolts and the foundation drawing.
- Section: Round conical (tapered round) steel pole
- Crown type: Fixed crown
- Crown frame: Stadium Matrix frame carrying 12 floodlights
- Standard heights: 15 m to 30 m; other heights produced to the project drawing
- Material: Steel Q235 or Q355
- Finish: Hot-dip galvanised as standard
- Supplied with: Base plate, anchor bolts, earthing terminal and foundation drawing
- Mounting: Crown frame welded to the pole top and drilled ready for the floodlights
Request a quotation for Stadium Matrix High Mast, 6–12 Floodlights
Quantity, destination port and your contact details are enough for us to price it. Tell us the pole height or road class if you have them.
Stadium Matrix high mast lights are specified where a large area has to be lit from a single point — stadiums, ports, freight yards, highways and industrial sites. This pole carries a stadium matrix crown frame with 6 or 12 floodlights, so the whole area is covered from one foundation.
The pole is delivered hot-dip galvanised with the base plate welded on, the anchor bolts and the foundation drawing. The crown frame is drilled to match the floodlight brackets, and the pole door gives access to the wiring and the earth terminal.
At a glance
| Section | Round conical (tapered round) steel pole |
| Crown type | Fixed crown |
| Crown frame | Stadium Matrix frame carrying 12 floodlights |
| Standard heights | 15 m to 30 m; other heights produced to the project drawing |
| Material | Steel Q235 or Q355 |
| Finish | Hot-dip galvanised as standard |
| Supplied with | Base plate, anchor bolts, earthing terminal and foundation drawing |
| Mounting | Crown frame welded to the pole top and drilled ready for the floodlights |
How to choose the head count
A stadium matrix spreads the floodlights across a rectangular frame rather than around a circle. That shape is chosen for rectangular illuminated areas — pitches, courts, hardstanding — where a ring wastes light beyond the corners and leaves the long edges uneven.
| Heads | Layout | Where it is usually specified | Watch |
|---|---|---|---|
| 6 | Three across, two rows — even coverage of a small pitch or yard | Five-a-side pitches, training areas, small courts | Lightest frame; corner fall-off is the first thing to check |
| 12 | Four across, three rows — denser coverage across the width | Full-size training pitches, multi-court areas | Frame weight and wind area climb; mast section follows |
On a matrix the aim of every head is set against a fixed frame, so the pattern does not drift between masts. That repeatability is what makes it suitable for a multi-mast pitch installation, where four masts have to produce one even surface.
What decides the mast
Height (15–30 m standard), frame weight, projected wind area and design wind speed. A matrix frame presents a larger flat area to the wind than a ring with the same head count, so on an exposed pitch the wind case usually governs the mast section rather than the head weight.
Construction: hot-dip galvanised Q235 or Q355, base plate, door, cable entry, anchor bolts and a foundation drawing sized to the loaded frame. Ladder or lifting carriage as options.
What to send with the enquiry
- Pitch dimensions and the mast positions, if more than one mast is involved.
- Required evenness across the playing surface.
- Luminaire weight and beam angle per head.
- Design wind speed, or site location.
Crown types compared
The crown frame is welded to the pole top before galvanising, so the number of floodlights is fixed at order and cannot be increased on site. The table below compares the crown types we build; the row in bold is the range on this page.
| Crown frame | Floodlights | Access | Mounting note |
|---|---|---|---|
| Triangular | 3–9 | Fixed | Three faces at 120°; each added floodlight lengthens its arm |
| Ring Crown | 4–10 | Fixed, or ladder-access | Heads on a circular ring; the most common choice for yards and terminals |
| Double Ring | 12 | Fixed | Two concentric rings; more heads without lengthening a single arm |
| Single Side | 4–8 | Fixed | All heads on one side; used where the mast stands at the edge of the lit area |
| Hexagonal | 6–18 | Fixed | Six faces; carries the highest head count of the fixed crowns |
| Double Tier | 8–16 | Fixed | Two levels; the lower tier lights the base of the mast |
| Stadium Matrix | 6–12 | Fixed | Rectangular matrix frame aimed at a pitch or arena |
| Lifting Ring | 8–16 | Internal lifting device | Crown lowered to ground level for maintenance without a platform |
All crown types share the same mast specification: round conical section, Q235 or Q355 steel, hot-dip galvanised, 15–30 m standard heights, supplied with base plate, anchor bolts, earthing terminal and foundation drawing. Head counts outside the ranges shown are built to the project drawing.
Stadium Matrix High Mast, 6–12 Floodlights — technical parameters
| Section | Round conical (tapered round) steel pole |
| Crown type | Fixed crown |
| Crown frame | Stadium Matrix frame carrying 12 floodlights |
| Standard heights | 15 m to 30 m; other heights produced to the project drawing |
| Material | Steel Q235 or Q355 |
| Finish | Hot-dip galvanised as standard |
| Supplied with | Base plate, anchor bolts, earthing terminal and foundation drawing |
| Mounting | Crown frame welded to the pole top and drilled ready for the floodlights |
| Crown options | Fixed, ladder-access or internally lifting crown; RAL powder coating on request |
| Pole section | Diameter, wall thickness and base plate confirmed to the wind zone at your site |
Tell us the pole height, the number of floodlights, the mounting height and the wind zone and we will confirm the section, the wall thickness, the base plate and the anchor bolts for your project.